关于我们 | 联系我们

库存查询

Solid State Timer, 1 A Current Rating, 120 VAC Input Voltage

Model 4310 can perform as an interval timer, or as a single-shot timer. The difference between interval and single-shot operation is the operation of the initiate switch. If the load is to operate from a continuous closure from the initiate switch, wire the timer with no jumper between terminals 6 and 7. In this mode the Model 4310 will function as an interval timer. If the load circuit is to operate for the entire timing period even if the initiate switch is closed for a short duration, connect terminals 6 and 7 and operate as a single-shot timer. In single-shot operation the power switched to the load cannot be removed with the initiate switch once the cycle has been initiated. 10 A zero voltage switching. Other voltages and times available from factory.
The model 4310 can perform as either interval timer or as a single short timer

Brand/Series	4310A Series
Contact Form	SPST-NO
Current Rating	1 A
Dielectric Rating	1500 V (RMS)
Function	Single Shot
Relay Type	Solid State
Standards	cULus, UL
Temperature, Operating, Maximum	85 °C
Temperature, Operating, Minimum	-20 °C
Termination	QC Tabs
Timer Type	Single Shot
Timing Range	1 Sec. to 300 Sec.
Voltage, Control	120VAC
关键词

Brand/Series 4310A Series  Artisan Controls Brand/Series 4310A Series  Relay - Time Delay (TDR) Brand/Series 4310A Series  Artisan Controls Relay - Time Delay (TDR) Brand/Series 4310A Series   Contact Form SPST-NO  Artisan Controls Contact Form SPST-NO  Relay - Time Delay (TDR) Contact Form SPST-NO  Artisan Controls Relay - Time Delay (TDR) Contact Form SPST-NO   Current Rating 1 A  Artisan Controls Current Rating 1 A  Relay - Time Delay (TDR) Current Rating 1 A  Artisan Controls Relay - Time Delay (TDR) Current Rating 1 A   Dielectric Rating 1500 V (RMS)  Artisan Controls Dielectric Rating 1500 V (RMS)  Relay - Time Delay (TDR) Dielectric Rating 1500 V (RMS)  Artisan Controls Relay - Time Delay (TDR) Dielectric Rating 1500 V (RMS)   Function Single Shot  Artisan Controls Function Single Shot  Relay - Time Delay (TDR) Function Single Shot  Artisan Controls Relay - Time Delay (TDR) Function Single Shot   Relay Type Solid State  Artisan Controls Relay Type Solid State  Relay - Time Delay (TDR) Relay Type Solid State  Artisan Controls Relay - Time Delay (TDR) Relay Type Solid State   Standards cULus, UL  Artisan Controls Standards cULus, UL  Relay - Time Delay (TDR) Standards cULus, UL  Artisan Controls Relay - Time Delay (TDR) Standards cULus, UL   Temperature, Operating, Maximum 85 °C  Artisan Controls Temperature, Operating, Maximum 85 °C  Relay - Time Delay (TDR) Temperature, Operating, Maximum 85 °C  Artisan Controls Relay - Time Delay (TDR) Temperature, Operating, Maximum 85 °C   Temperature, Operating, Minimum -20 °C  Artisan Controls Temperature, Operating, Minimum -20 °C  Relay - Time Delay (TDR) Temperature, Operating, Minimum -20 °C  Artisan Controls Relay - Time Delay (TDR) Temperature, Operating, Minimum -20 °C   Termination QC Tabs  Artisan Controls Termination QC Tabs  Relay - Time Delay (TDR) Termination QC Tabs  Artisan Controls Relay - Time Delay (TDR) Termination QC Tabs   Timer Type Single Shot  Artisan Controls Timer Type Single Shot  Relay - Time Delay (TDR) Timer Type Single Shot  Artisan Controls Relay - Time Delay (TDR) Timer Type Single Shot   Timing Range 1 Sec. to 300 Sec.  Artisan Controls Timing Range 1 Sec. to 300 Sec.  Relay - Time Delay (TDR) Timing Range 1 Sec. to 300 Sec.  Artisan Controls Relay - Time Delay (TDR) Timing Range 1 Sec. to 300 Sec.   Voltage, Control 120VAC  Artisan Controls Voltage, Control 120VAC  Relay - Time Delay (TDR) Voltage, Control 120VAC  Artisan Controls Relay - Time Delay (TDR) Voltage, Control 120VAC