SLPP25-550P88产品概述
Banner EZ-SCREEN LP emitters and receivers provide a redundant, microprocessor-controlled, opposed-mode optoelectronic “curtain of light”, or “safety light screen”. EZ-SCREEN LP typically is used for point-of-operation safeguarding, and is suited to safeguard a variety of machinery. Emitters have a row of synchronized modulated infrared (invisible) light-emitting diodes (LEDs) in a compact metal housing. Receivers have a corresponding row of synchronized photodetectors. The light screen created by the emitter and receiver is called the “defined area”; its width
and height are determined by the length of the sensor pair and the distance between them. The low-profile housing provides maximum sensing
within minimum space; its defined area (sensing area) is equivalent to the height of the housing. The maximum sensing range is 7 m (23"), which
decreases if corner mirrors are used. The sensing area extends from end to end of the housing; there is no “dead zone”. Specialty brackets allow easy mounting of cascaded sensors, without any loss of resolution between sensor pairs.
In typical operation, if any part of an operator's body (or any opaque object) of more than a pre-determined cross section is detected, the solid state output signal switching device (OSSD) safety outputs will turn OFF. These safety outputs are connected to the guarded machine's final switching devices (FSDs) that control the primary control elements (MPCEs), which immediately stop the motion of the guarded machine.
Features:
A Two-Piece Optoelectronic Safeguarding Device Creates a Screen of Synchronized, Modulated Infrared Sensing Beams That Extend from End to End of the Housing (No “dead Zone”)
Low-Profile, Compact Package for Smaller Production Machines, Robust for Large Power Presses
Choose Standard or Cascadeable Models
14 mm or 25 mm Resolution; Defined Areas from 270 to 1810 mm (10.6" to 71.2")
100 mm to 7 m (4" to 23") Sensing Range
Easily Configured Reduced Resolution
Zone and Status Indicators Plus Digital Display to Indicate Number of Beams Blocked, Detailed Diagnostics
Highly Immune to EMI, RFI, Ambient Light, Weld Flash and Strobe Light
Selectable 1-Channel, 2-Channel or No External Device Monitoring
Datasheet
