Caddock - MP9100-0.050-1% - Heat Sink TO-247 Radial Tol 1% Pwr-Rtg 100 W Res 0.05 Ohms Thick Film Resistor|70089386

MP9100-0.050-1%产品概述

Power Film Resistors, Radial Leaded Termination, Heat Sink Mountable Design, Kool-Pak®
Temperature Coefficient:
MP915, MP916, MP925, MP930, MP850:
ΔR taken at +150°C, ref. to 25°C
0.500 ohm to 100 K, –20 to +80 ppm/°C
0.050 ohm to 0.499 ohm: 0 to +200 ppm/°C
0.020 ohm to 0.049 ohm: 0 to +300 ppm/°C
0.010 ohm to 0.019 ohm: 0 to +500 ppm/°C
MP9100:
ΔR taken at +175°C, ref. to +25°C
0.500 ohm to 100 ohm: –20 to +80 ppm/°C
0.050 ohm to 0.49 ohm: 0 to +150 ppm/°C
Measurement Note:
For these specifications, resistance measurement shall be made at a point on the leads 0.2" (5 mm) from the package.
The Thermal Design Should Satisfy the Following Equation:
Case Temperature (Tc) + [Thermal Resistance (Rφjc) × Power Applied (Watts)] < Tmax, considering the full operating temperature range of the application.
Mounting Note:
Mount on a smooth, clean and flat heat sink surface with a thermal interface material, such as thermal grease. The entire exposed heat dissipating mounting surface (ceramic or metal) must be in contact with the heat sink. When screw mounting, use a compression washer which provides a mounting force of 150 to 300 pounds (665 to 1330 N). This will provide sufficient pressure on the package over time and through large temperature variations to maintain the maximum power dissipation capability. Maximum mounting torque to avoid package damage is 8 in.-lbs (0.9 N-m). If a spring clip is used, a clip force of 8 to 30 pounds (35 to 130 N) is recommended to be applied to the center of the package. The clip should be round or smooth in the contact area to avoid concentrating the load on a small point of the plastic body. Another mounting option is to use a pressure bar method, which can achieve a greater mounting force with greater contact area.
Features

Non-Inductive Design, Ideal for Power Switching Circuits, Snubbers, RF Applications:
50 Ohm Performance Up to 500 MHz

Values as Low as 0.010 Ohm Ideal for Current Sensing in Power Supplies, Motor Controls, and Battery Circuits

Resistor Element Electrically Isolated from the Heat Dissipating Mounting Surface (1500 Volts rms AC)

1% Tolerance for Most Values

参考价格及参考库存

美国1号仓库 仓库直销，订单金额100元起订，满300元含运，满500元含税运，有单就有优惠，量大更优惠，支持原厂订货

型号	制造商	描述	操作
MP9100-0.050-1% [更多]	Caddock Electronics Inc	RES 0.05 OHM 100W 1% TO247	搜索查看资料

美国2号仓库 仓库直销，订单金额100元起订，满300元含运，满500元含税运，有单就有优惠，量大更优惠，支持原厂订货

型号	制造商	描述	操作
MP9100-0.050-1% [更多]	Caddock Electronics Inc	Thick Film Resistors - Through Hole 0.05 ohm 100W 1% TO-247 PKG PWR FILM RoHS: Compliant	搜索

英国2号仓库 仓库直销，订单金额100元起订，满300元含运，满500元含税运，有单就有优惠，量大更优惠，支持原厂订货

型号	制造商	描述	操作
MP9100-0.050-1% [更多]	Caddock Electronics Inc	Resistor, Thick Film, Res 0.05 Ohms, Pwr-Rtg 100 W, Tol 1%, Radial, TO-247, Heat Sink RoHS: Not Compliant	搜索查看资料

英国8号仓库 仓库直销，订单金额100元起订，满300元含运，满500元含税运，有单就有优惠，量大更优惠，支持原厂订货

型号	制造商	描述	操作
MP9100-0.050-1% [更多]	Caddock Electronics Inc		搜索

美国1号仓库 查看更多相关产品

参考图片	制造商 / 描述 / 型号 / 仓库库存编号 / 别名	PDF	操作
	Caddock Electronics Inc. RES 50 MOHM 100W 1% TO247 详细描述：±1% 100W Through Hole Resistor TO-247-2 Moisture Resistant, Non-Inductive Thick Film 型号：MP9100-0.050-1% 仓库库存编号：MP9100-0.050F-ND 别名：MP9100-0.050F <br>MP91000.0501% <br>REFMP9100-0.050-1% <br>	无铅	搜索

www.szcwdz.com 查看更多相关产品

参考图片	型号/品牌	描述 / 技术参考	操作
	MP9100-0.050-1% CADDOCK	功率电阻 0.05欧姆 1% 100W	查价格库存查看详细

英国2号仓库 查看更多相关产品

参考图片	制造商 / 说明 / 型号 / 仓库库存编号	PDF	操作
	Caddock Resistor; Thick Film; Res 0.05 Ohms; Pwr-Rtg 100 W; Tol 1%; Radial; TO-247; Heat Sink 型号：MP9100-0.050-1% 仓库库存编号：70089386		搜索

www.szcwdz.cn 查看更多相关产品

参考图片	型号/品牌	描述 / 技术参考	操作
	MP9100-0.050-1% CADDOCK	功率电阻 0.05欧姆 1% 100W	查价格库存查看详细
	MP9100-0.050-1% Caddock Electronics Inc	RESISTOR 0.05 OHM 100W 1% TO-247	查价格库存查看详细

www.szcwdz.com.cn 查看更多相关产品

参考图片	型号/品牌	描述 / 技术参考	操作
	MP9100-0.050-1% Caddock Electronics Inc	RESISTOR 0.050 OHM 100W 1% TO-24	查价格库存查看详细

Brand/Series	Kool-Pak MP9000 Series
Lead Pitch	0.400 in. +?- 0.010 in.
Length, Lead	0.570 in. +?- 0.050 in.
Material, Element	Thick Film
Package Type	TO-247
Packaging	Tube
Power Rating	100 W
Resistance	0.05 Ohms
Resistance, Thermal, Junction to Case	1.50 °C⁄W
Special Features	Heat Sink
Temperature Coefficient	0 to +150 ppm?°C
Temperature, Operating, Maximum	175 °C
Temperature, Operating, Minimum	-55 °C
Termination	Radial Leads
Thickness	0.195 in. +?- 0.010 in.
Tolerance	±1 %
Width	0.620 in. +?- 0.010 in.
关键词

MP9100-0.050-1% -

Resistor; Thick Film; Res 0.05 Ohms; Pwr-Rtg 100 W; Tol 1%; Radial; TO-247; Heat Sink

MP9100-0.050-1%产品概述

MP9100-0.050-1%产品信息

MP9100-0.050-1%关联产品

MP9100-0.050-1%客户还搜索了

MP9100-0.050-1%相关搜索