XR33032ID-F产品概述
The XR33032/35/38 family of high performance half duplex RS-485 transceivers are optimized to operate over a wide range of supply voltage, from +2.8 V to
+5.5 V. The analog bus pins can withstand direct shorts up to ±18 V, and are protected against ESD events up to ±15 kV.
In an isolated application it may be more efficient to use a remote power supply rather than generating an isolated supply at every node. The XR33032/35/38 transceivers can operate with more than 2 V IR drop in the cable when utilizing a remote 5 V power supply. The transceivers draw less than 600 μA, and typically only 300 μA when idling with the receivers active.
The receivers include full fail-safe circuitry, guaranteeing a logic-high receiver output when the receiver inputs are open, shorted, or undriven. The receiver input impedance is 96 kΩ (1⁄8 unit load), allowing up to 256 devices on the bus while preserving the full signal margin.
The drivers are protected by short circuit detection as well as thermal shutdown, and maintain high impedance in shutdown or when powered off. The XR33032 and XR33035 drivers are slew limited for reduced EMI and error-free communication over long or unterminated data cables.
The DE and RE pins include hot swap circuitry to prevent false transitions on the bus during power-up or live insertion, and can enter a low current shutdown
mode (40 nA typically) for extreme power savings.
Features:
2.8 V to +5.5 V Operating Range
18 V Fault Tolerance on Analog Bus pins
Robust ESD (ElectroStatic Discharge) Protection:
±15 kV IEC 61000-4-2 Air Gap Discharge
±8 kV IEC 61000-4-2 Contact Discharge
±15 kV Human Body Model
±4 kV Human Body Model on non-bus pins
300 μA Idle Current, 40 nA Shutdown Current
Enhanced Receiver Fail-Safe Protection for Open, Shorted, or Terminated but Idle Data Lines
Hot-Swap Glitch Protection on DE and RE Pins
river Short Circuit Current Limit and Thermal Shutdown for Overload Protection
1⁄8th Unit Load Allows up to 256 Devices on Bus
Industry Standard 8 NSOIC Half Duplex Package
