FLUKE-CV201产品概述
Compliance without compromise. Safety without sacrifice. Increase the safety and speed of electrical thermal imaging inspections with the new Fluke ClirVu® IR Windows. Reduce the risk of arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance.
No more removing the panel door for installation
Work permit requirements and NFPA 70E processes are significantly reduced
Full PPE is often not required so inspections are done faster and more comfortable
Features:
Superior arc blast protection:
— High temperature silicon gaskets
— Mounting and door latches provide high pressure gasket compression
— Die cast components are manufactured with the highest strength alloys (ZA-27 and EZAC)
— Jam nut screws are made from 4037 steel, heat treated to 160,000 psi tensile
Torture Tested to the highest test ratings
— IEEE C37.20.7 63 kA Arc tested at KEMA, UL 50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE
Quick and easy installation
— Installation takes 5 minutes with one technician
— Only one hole necessary with standard Greenlee® punch. Rear access required for punch connection only (Easily accomplished with one technician)
— Installs from front; no template needed; no rear access required
— Grounds instantly to metal enclosure with patent pending AutoGround™ process
— Sharp teeth on jam nuts assure four gas-tight ground connections
— All components have electrically conductive finishes for optimum grounding
Quarter turn latch easily opens hinged cover
Corrosion and UV resistance for challenging outdoor environments:
— All hardware is made from stainless steel or zinc plated steel
— Die cast components are plated with black chromium over high phosphorous Electroless nickel
Three sizes 50 mm, 75 mm and 95 mm (2 in , 3 in and 4 in) with the option of hand turn or security key door latches
Datasheet
