HSCMRNN001PG2A3 -
Sensor, Pressure, Low, Radial Single Port, 1 PSI Gage, 3.3v, Digital I2C Output
- 制造商产品编号：
- HSCMRNN001PG2A3
- 仓库库存编号：
- 70120303
由于产品数据库庞大，部分产品信息可能未能及时更新，下单前请与销售人员确认好实时在库数量，谢谢合作！
HSCMRNN001PG2A3产品概述
The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 2 kHz.
The HSC Series is calibrated over the temperature range of 0° C to 50° C [32° F to 122° F]. The sensor is characterized for operation from a single power supply of either 3.3 VDC or 5.0 VDC.
These sensors measure absolute, differential, and gage pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Differential versions allow application of pressure to either side of the sensing diaphragm. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere.
The HSC Series sensors are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. They are designed and manufactured according to standards in ISO 9001.
Datasheet
