MCP79410-I/MS产品概述
The MCP79410 general-purpose I2C™Compatible real-time clock/calendar (RTCC) is highly integrated with nonvolatile memory and advanced features normally found in higher priced devices. These features include a battery switchover circuit for backup power, a timestamp to log power failures and digital trimming for accuracy. Using a low-cost 32.768 kHz crystal or other clock source, time is tracked in either a 12-hour or 24-hour format with an AM/PM indicator and timing to the second, minute, hour, day of the week, day, month and year. As an interrupt or wakeup signal, a multifunction open drain output can be programmed as an Alarm Out or as a Clock Out that supports 4 selectable frequencies. In addition, non-volatile memory is included along with a Unique ID in a locked section of EEPROM that can be unlocked and programmed by the End User.
Features:
Low Power Operation — VCC Min. = 1.8 V —ICC <5 μA Typical Dynamic Current
Low Backup Power — VBAT Min. = 1.3 V —IBAT <700 nA
Dual alarms with single IRQ Output that operates on VCC or VBAT
Digital Trimming Range from -127 to +127 ppm in 1 ppm steps
EEPROM has 8 Bytes/Page with Block Sector write protection