关于我们 | 联系我们

库存查询

The DNC-T2003 through DNC-T2032 controls are output sequencers with an ad justable ON TIME, OFF TIME, and LAST OUTPUT. Upon application of power to the L1 and L2 terminals with the high pressure switch co ntacts c losed, the OFF TIME is initiated. At the end o f the preset OFF TIME, output 1will turn on for the preset ON TIME. The control will cycle through all selected outputs until the high and low pressure switch contacts are opened. If the pressure switch contacts open during the ON TIME, the output will complete the active ON cycle. The next time the high pressure switch is closed the next output in the sequence is fired. Pressure monitoring with no hysteresis is achieved by using only a high pressure switch. Placing a jumper across the high pressure input forces the control to run continuously.

Accuracy	±3% over temperature and voltage range
Brand/Series	DNC Series
Dimensions	6.75" x 4.75" x 1.103"
Enclosure Rating	NEMA 4
For Use With	Bag House
Frequency	50/60 Hz
Input Type	Voltage
Mounting Type	Surface
Number of Outputs	3
Output Type	Solid State
Power Dissipation	6.30 VA max plus load
Primary Type	Controller
Special Features	Digital Microprocessor Controlled Circuitry, Easily Programmable, Finger Safe Terminations, Non-Volatile Memory, Universal Voltage Input
Standards	UL, cUL
Supply Voltage	95 to 265 VAC
Temperature, Operating	–40 to +66°C
Temperature, Operating, Maximum	66 °C
Temperature, Operating, Minimum	-40 °C
Temperature, Operating, Range	-40 to +66 °C
Type	Dust Collector
关键词

• 参考图片
• 制造商 / 说明 / 型号 / 仓库库存编号
• PDF
• 操作

• 
  
• NCC
  Dust Collector; 120 VAC; 2 VA (Max.); 50/60 Hz; -40 to degC
  
  型号：DNC-T2010-020
  仓库库存编号：70059753
  
• 
  
• 搜索

• 
  
• NCC
  Dust Collector; 6 position seq. timer, 92-265 AC, 50/60Hz.150VA Max, digital display
  
  型号：DNC-T2006-R20
  仓库库存编号：70059760
  
• 
  
• 搜索

• 
  
• NCC
  Dust Collector; Input Voltage 95-265 VAC, 50/60Hz, Output 150 VA, LED display
  
  型号：DNC-T2010-R20
  仓库库存编号：70059761
  
• 
  
• 搜索

Accuracy ±3% over temperature and voltage range  NCC Accuracy ±3% over temperature and voltage range  Timer Control Accuracy ±3% over temperature and voltage range  NCC Timer Control Accuracy ±3% over temperature and voltage range   Brand/Series DNC Series  NCC Brand/Series DNC Series  Timer Control Brand/Series DNC Series  NCC Timer Control Brand/Series DNC Series   Dimensions 6.75" x 4.75" x 1.103"  NCC Dimensions 6.75" x 4.75" x 1.103"  Timer Control Dimensions 6.75" x 4.75" x 1.103"  NCC Timer Control Dimensions 6.75" x 4.75" x 1.103"   Enclosure Rating NEMA 4  NCC Enclosure Rating NEMA 4  Timer Control Enclosure Rating NEMA 4  NCC Timer Control Enclosure Rating NEMA 4   For Use With Bag House  NCC For Use With Bag House  Timer Control For Use With Bag House  NCC Timer Control For Use With Bag House   Frequency 50/60 Hz  NCC Frequency 50/60 Hz  Timer Control Frequency 50/60 Hz  NCC Timer Control Frequency 50/60 Hz   Input Type Voltage  NCC Input Type Voltage  Timer Control Input Type Voltage  NCC Timer Control Input Type Voltage   Mounting Type Surface  NCC Mounting Type Surface  Timer Control Mounting Type Surface  NCC Timer Control Mounting Type Surface   Number of Outputs 3  NCC Number of Outputs 3  Timer Control Number of Outputs 3  NCC Timer Control Number of Outputs 3   Output Type Solid State  NCC Output Type Solid State  Timer Control Output Type Solid State  NCC Timer Control Output Type Solid State   Power Dissipation 6.30 VA max plus load  NCC Power Dissipation 6.30 VA max plus load  Timer Control Power Dissipation 6.30 VA max plus load  NCC Timer Control Power Dissipation 6.30 VA max plus load   Primary Type Controller  NCC Primary Type Controller  Timer Control Primary Type Controller  NCC Timer Control Primary Type Controller   Special Features Digital Microprocessor Controlled Circuitry, Easily Programmable, Finger Safe Terminations, Non-Volatile Memory, Universal Voltage Input  NCC Special Features Digital Microprocessor Controlled Circuitry, Easily Programmable, Finger Safe Terminations, Non-Volatile Memory, Universal Voltage Input  Timer Control Special Features Digital Microprocessor Controlled Circuitry, Easily Programmable, Finger Safe Terminations, Non-Volatile Memory, Universal Voltage Input  NCC Timer Control Special Features Digital Microprocessor Controlled Circuitry, Easily Programmable, Finger Safe Terminations, Non-Volatile Memory, Universal Voltage Input   Standards UL, cUL  NCC Standards UL, cUL  Timer Control Standards UL, cUL  NCC Timer Control Standards UL, cUL   Supply Voltage 95 to 265 VAC  NCC Supply Voltage 95 to 265 VAC  Timer Control Supply Voltage 95 to 265 VAC  NCC Timer Control Supply Voltage 95 to 265 VAC   Temperature, Operating –40 to +66°C  NCC Temperature, Operating –40 to +66°C  Timer Control Temperature, Operating –40 to +66°C  NCC Timer Control Temperature, Operating –40 to +66°C   Temperature, Operating, Maximum 66 °C  NCC Temperature, Operating, Maximum 66 °C  Timer Control Temperature, Operating, Maximum 66 °C  NCC Timer Control Temperature, Operating, Maximum 66 °C   Temperature, Operating, Minimum -40 °C  NCC Temperature, Operating, Minimum -40 °C  Timer Control Temperature, Operating, Minimum -40 °C  NCC Timer Control Temperature, Operating, Minimum -40 °C   Temperature, Operating, Range -40 to +66 °C  NCC Temperature, Operating, Range -40 to +66 °C  Timer Control Temperature, Operating, Range -40 to +66 °C  NCC Timer Control Temperature, Operating, Range -40 to +66 °C   Type Dust Collector  NCC Type Dust Collector  Timer Control Type Dust Collector  NCC Timer Control Type Dust Collector