NCP51198PDR2G产品概述
The NCP/NCV51198 is a simple, cost-effective, high-speed linear regulator designed to generate the VTT termination voltage rail for DDR-I, DDR-II and DDR-III memory. The regulator is capable of actively sourcing or sinking up to ±1.5 A for DDR-I, or up to ±0.5 A for DDR-II /-III while regulating the output voltage to within ±30 mV. The output termination voltage is tightly regulated to track VTT = (VDDQ / 2) over the entire current range. The NCP/NCV51198 incorporates a high-speed differential amplifier to provide ultra-fast response to line and load transients. Other features include extremely low initial offset voltage, excellent
load regulation, source/sink soft-start and on-chip thermal shut-down protection. The NCP/NCV51198 features the power-saving Suspend To Ram (STR) function which will tri-state the regulator output and lower the quiescent current drawn when the /SS pin is pulled low. The NCP/NCV51198 is available in a SOIC-8 Exposed Pad package.
Features:
Generate DDR Memory Termination Voltage (VTT)
For DDR-I, DDR-II, DDR-III Source/Sink Currents
Supports DDR-I to ±1.5 A, DDR-II to ±0.5 A (peak)
Integrated Power MOSFETs with Thermal Protection
Stable with 10 F Ceramic VTT Capacitor
High Accuracy Output Voltage at Full-Load
Minimal External Component Count
Shutdown for Standby or Suspend to RAM (STR) mode
Built-in Soft Start
NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable
These are Pb-Free Devices
Applications:
Desktop PCs, Notebooks, and Workstations
Graphics Card DDR Memory Termination
Set Top Boxes, Digital TVs, Printers
Embedded Systems
Active Bus Termination