2800371产品概述
The VAL-SQ NP… surge protective device (SPD) provides whole-house surge protection in a panel-mount, pluggable form factor. A high-energy suppression circuit provides 32 kA of surge current protection per phase. Each surge suppression mode has over-current and thermal fusing for safety.
The VAL-SQ NP… has the same footprint as two standard 1-inch pitch circuit breakers to allow installation inside a standard 1-inch pitch load center. Operating status lights are easily observed and provide verification of protection.
The replaceable plug of the VAL-SQ NP… allows a homeowner to safely replace the surge protection plug if it reaches end of life. All other products of this type require a skilled electrician to replace the surge components at end of life.
The VAL-SQ NP… is suitable for single-phase 120/240 applications with common or separate neutral and ground.
Features
– 32 kA surge current capacity per phase protects against high-energy lightning strikes and transient voltages
– Initial installation by a certified electrician; plug replacement by homeowner
– UL nominal surge discharge current (IN) rating of 10 kA
– LEDs provide continuous feedback on the status of each phase
– UL 1449 3rd edition classified
Datasheet
