RASPBERRY PI COMPUTE MODULE KIT产品概述
Raspberry Pi Compute Module
Raspberry Pi Compute is a SODIMM format module containing only the basic processor/RAM elements of a Raspberry Pi Model B, plus a Flash memory chip. All processor I/O are accessible via a 200-pin edge connector. The Compute module plugs into an I/O board providing a range of standard connectors for development purposes. A variety of 'boot' methods are available depending on the presence or otherwise of a host computer plugged into a microUSB socket, the state of a GPIO pin and a jumper link. The Raspberry Pi Compute module is aimed at industrial design engineers for integration into production embedded applications.
Raspberry Pi Compute Module
Broadcom BCM2835 700 MHz ARM1176JZFS processor with FPU and VideoCore IV dual-core GPU
GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
512 MB SDRAM
4 GB eMMC MLC Flash memory (Replaces Flash memory card of standard Raspberry Pi)
Access to all I/O via 200-pin edge connector
Dimensions: 67 x 31 mm 200-pin SODIMM format
Raspberry Pi Compute I/O Board
Provides standard I/O sockets for the Compute module
200-pin SODIMM connector for Compute module
4 x 30-pin headers (46 x GPIO, I2C bus, camera plus power and ground pins)
GPIO logic level selected by jumper link to 1.8 V or 3.3 V
HDMI socket
USB-A socket
microUSB socket for booting from attached host
microUSB socket for power supply
2 x CSI camera connectors (Requires adapter for Raspberry Pi video cameras, supplied with kit)
2 x DSI display connectors
Footprint for JTAG connector
Power LED
Boot Status LED
Supplied with
Raspberry Pi Compute kit: Universal power supply, adapter for Raspberry Pi cameras.