关于我们 | 联系我们

库存查询

Sheet metal hole cutter, spiral tap, blank
HSS hole cutter with spiral tap
For burr-free drilling and planing pipes, sheet metals and profiles, as well as molding, retro drilling and expanding cut-outs
Suitable for construction steel, stainless steel, non-ferrous metals, Plexiglas, plastic and wood up to 6 mm thick
Crosswise grinding means no center-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Supplied With:
Set, stock no. 499-261 contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm
Warning:
Not suitable for aluminum. Use without cooling agents.

Brand/Series	371566 Series
Material	HSS
Number of Pieces	2
Size Range	5 to 20; 5 to 31
Size, Card, Maximum	31
关键词

Brand/Series 371566 Series  RS Pro Brand/Series 371566 Series  Drill and Step Bits Brand/Series 371566 Series  RS Pro Drill and Step Bits Brand/Series 371566 Series   Material HSS  RS Pro Material HSS  Drill and Step Bits Material HSS  RS Pro Drill and Step Bits Material HSS   Number of Pieces 2  RS Pro Number of Pieces 2  Drill and Step Bits Number of Pieces 2  RS Pro Drill and Step Bits Number of Pieces 2   Size Range 5 to 20; 5 to 31  RS Pro Size Range 5 to 20; 5 to 31  Drill and Step Bits Size Range 5 to 20; 5 to 31  RS Pro Drill and Step Bits Size Range 5 to 20; 5 to 31   Size, Card, Maximum 31  RS Pro Size, Card, Maximum 31  Drill and Step Bits Size, Card, Maximum 31  RS Pro Drill and Step Bits Size, Card, Maximum 31