关于我们 | 联系我们

库存查询

SITOP Electronic Diagnostic Module
The SITOP Electronic Diagnostic Module is specially tailored to the characteristics of switched-mode power supplies. The electronics permit brief current peaks and switch longer overloads off-circuit, even on long thin cables and with earth leakages in which the current is limited by high resistance. In this case the circuit-breakers do not trip, or they trip too late, even if the power supply could deliver the current. The selectivity module reliably disconnects the faulty load circuits, and the supply to the other loads continues with absolutely no interruption so that total failure of the plant can be avoided. The fault is output via a common signaling contact and indicated by an LED on the relevant load circuit; in this way, the fault can be quickly localized and downtimes are minimized.
Features:

Current Setting Range Between 0.5 and 3 A for Each Load Circuit

Remote Reset for Switching Channels Back in that Have Been Disconnected From a Central Location

Reset Button for Each Channel

Manual Disconnection and Switching in of Individual Channels Via a Reset Button, e.g for Commissioning Purposes (on SITOP Select Via a Fuse)

Optimized Display of Operating Status Via 3-Color LED with Additional Display of a Manually Disconnected Channel

Power-Up Sequence Can Be Set Via DIP Switches; Switches Indicate the Setting

Cover on Potentiometers and DIP Switches Prevents Undesired Parameter Setting, Sealing Possible
Specifications:

Ambient Temperature: –20 to 70°C

Dimensions (W × H × D): 30 × 80 × 100 mm

Brand/Series	6EP Series
Dimensions	72 W x 80 H x 72 D mm
For Use With	SITOP Power Supplies
Input Voltage	22-30 VDC
Mounting Type	DIN Rail
Type	Load Control Module
关键词

• 参考图片
• 制造商 / 说明 / 型号 / 仓库库存编号
• PDF
• 操作

• 
  
• Siemens
  SITOP Electronic Diagnostic Module: 4x(3A - 10A)
  
  型号：6EP19612BA21
  仓库库存编号：70240408
  
• 
  
• 搜索

Brand/Series 6EP Series  Siemens Brand/Series 6EP Series  Load Control Module Brand/Series 6EP Series  Siemens Load Control Module Brand/Series 6EP Series   Dimensions 72 W x 80 H x 72 D mm  Siemens Dimensions 72 W x 80 H x 72 D mm  Load Control Module Dimensions 72 W x 80 H x 72 D mm  Siemens Load Control Module Dimensions 72 W x 80 H x 72 D mm   For Use With SITOP Power Supplies  Siemens For Use With SITOP Power Supplies  Load Control Module For Use With SITOP Power Supplies  Siemens Load Control Module For Use With SITOP Power Supplies   Input Voltage 22-30 VDC  Siemens Input Voltage 22-30 VDC  Load Control Module Input Voltage 22-30 VDC  Siemens Load Control Module Input Voltage 22-30 VDC   Mounting Type DIN Rail  Siemens Mounting Type DIN Rail  Load Control Module Mounting Type DIN Rail  Siemens Load Control Module Mounting Type DIN Rail   Type Load Control Module  Siemens Type Load Control Module  Load Control Module Type Load Control Module  Siemens Load Control Module Type Load Control Module