2231A-30-3产品概述
The Model 2231A-30-3 Triple Channel DC Power Supply can output a total of 195W of power, providing the power levels needed to energize a wide range of circuits and devices for benchtop work. Two channels can supply up to 30V at 3A each; the third channel can provide up to 5V at 3A. The Model 2231A-30-1 does not compromise on performance or convenience features, offering the versatility and ease of use you need, so it can be the only DC power supply on your bench.
Quality DC Power
The Model 2231A-30-3 is a linear-based design with less than 5mVp-p noise per output. Voltage and current settings have basic accuracies of 0.06% and 0.2% respectively. The load voltage and load current readback results provide the same levels of accuracy, so you can be confident you are sourcing accurate, low noise voltages and currents to your device-under-test (DUT).
Three Fully Independent Outputs
Each output of the Model 2231A-30-3 is fully programmable and can be turned on and off independently from the other channels; it essentially provides three power supplies in one instrument. You can power up both the analog circuitry and the digital circuitry of a printed circuit board or a complete device, all with the same instrument.
All Outputs Are Isolated from Each Other and from Ground
Each output can power a circuit on a different ground reference. The low connection on each output is not connected to any of the other outputs. That means one supply can test three separate circuits on three different ground references or can power circuits that are transformer or optically isolated from each other. Furthermore, all outputs are not referenced to ground, so the Model 2231A-30-3 can power both floating circuits and grounded circuits.
Power Bipolar Circuits
Because the Model 2231A-30-3’s outputs are isolated, one output can be turned effectively into a negative source by connecting its high terminal to the common reference point of a bipolar circuit. A second output can connect its low terminal to the same common reference point. The result is a positive output and a negative output. If the two 30V channels are used in this configuration, both outputs can be changed at the same time by using the Model 2231A-30-3’s tracking function. That allows varying both channels at the same time while keeping their outputs at identical magnitudes.
Applications:
Engineering and Science Student Labs
Service Work
Electronic Design
Features:
Get three isolated, independent, and adjustable outputs in one instrument
Output a total of 195W of power with two 30V@3A outputs and one 5V@3A output
Set voltage outputs with 0.06% basic accuracy and current outputs with 0.2% basic accuracy
Output DC power with less than 5mVp-p noise
Display voltage and current measurements continuously from all three outputs
Double output levels by connecting the two 30V channels in series or parallel
Store frequently used configurations in any of 30 setup memory locations
Control the supply from a PC with an optional USB adapter"
Datasheet
