关于我们 | 联系我们

库存查询

Electrical Specifications. Inductance: Measured at 1 V with no DC current. Incremental Current: The typical current at which the inductance will be decreased by 5% from its initial zero DC value. Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" (6.35 mm) of the insulating sleeve edge. Operating Temperature: –55°C to +125°C (no load). –55°C to +85°C (at full rated current). Current Rating: Maximum continuous. Operating current (DC or RMS) based on a 40°C temperature rise.

Mechanical Specifications. Wire: Solid soft copper. Terminals: 20 AWG tinned copper leads. Coating: Polyolefin tubing — flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements. Core Material: Ferrite.

Features

Printed Circuit Mounting

Protected By Polyolefin Tubing

High Saturation Bobbin Used Allowing High Inductance with Low DC Resistance

Pre-Tinned Leads

High Resistivity Core Offers Very High Parallel Resistance, Resulting in Maximum Coil Performance

20 Sleeveless Models Available at Reduced Cost

Brand/Series	IHD Series
Current Rating	0.8 A
Diameter, Lead	0.032 "
Dimensions	0.46" Dia. x 0.9" L
Inductance	1000 μH
Length, Lead	1.13 "
Mounting Type	PCB
Resistance, DC	0.844 Ohms
Temperature, Operating, Maximum	+125 °C
Temperature, Operating, Minimum	–55 °C
Termination	Through-hole
Tolerance	±15 %
Type	High Current
关键词

Brand/Series IHD Series  Vishay Dale Brand/Series IHD Series  Inductors Brand/Series IHD Series  Vishay Dale Inductors Brand/Series IHD Series   Current Rating 0.8 A  Vishay Dale Current Rating 0.8 A  Inductors Current Rating 0.8 A  Vishay Dale Inductors Current Rating 0.8 A   Diameter, Lead 0.032 "  Vishay Dale Diameter, Lead 0.032 "  Inductors Diameter, Lead 0.032 "  Vishay Dale Inductors Diameter, Lead 0.032 "   Dimensions 0.46" Dia. x 0.9" L  Vishay Dale Dimensions 0.46" Dia. x 0.9" L  Inductors Dimensions 0.46" Dia. x 0.9" L  Vishay Dale Inductors Dimensions 0.46" Dia. x 0.9" L   Inductance 1000 μH  Vishay Dale Inductance 1000 μH  Inductors Inductance 1000 μH  Vishay Dale Inductors Inductance 1000 μH   Length, Lead 1.13 "  Vishay Dale Length, Lead 1.13 "  Inductors Length, Lead 1.13 "  Vishay Dale Inductors Length, Lead 1.13 "   Mounting Type PCB  Vishay Dale Mounting Type PCB  Inductors Mounting Type PCB  Vishay Dale Inductors Mounting Type PCB   Resistance, DC 0.844 Ohms  Vishay Dale Resistance, DC 0.844 Ohms  Inductors Resistance, DC 0.844 Ohms  Vishay Dale Inductors Resistance, DC 0.844 Ohms   Temperature, Operating, Maximum +125 °C  Vishay Dale Temperature, Operating, Maximum +125 °C  Inductors Temperature, Operating, Maximum +125 °C  Vishay Dale Inductors Temperature, Operating, Maximum +125 °C   Temperature, Operating, Minimum –55 °C  Vishay Dale Temperature, Operating, Minimum –55 °C  Inductors Temperature, Operating, Minimum –55 °C  Vishay Dale Inductors Temperature, Operating, Minimum –55 °C   Termination Through-hole  Vishay Dale Termination Through-hole  Inductors Termination Through-hole  Vishay Dale Inductors Termination Through-hole   Tolerance ±15 %  Vishay Dale Tolerance ±15 %  Inductors Tolerance ±15 %  Vishay Dale Inductors Tolerance ±15 %   Type High Current  Vishay Dale Type High Current  Inductors Type High Current  Vishay Dale Inductors Type High Current