关于我们 | 联系我们

库存查询

Electrical Specifications. Inductance: Measured at 1 V with no DC current. Incremental Current: The typical current at which the inductance will be decreased by 5% from its initial zero DC value. Dielectric Rating: 2500 V_RMS between winding and outer circumference to within 0.250" (6.35 mm) of the insulating sleeve edge. Operating Temperature: –55°C to +125°C (no load). –55°C to +85°C (at full rated current). Current Rating: Maximum continuous. Operating current (DC or RMS) based on a 40°C temperature rise. Tolerance: 15%.
Mechanical Specifications. Wire: Solid soft copper. Terminals: 20 AWG tinned copper leads. Coating: Polyolefin tubing — flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements. Core Material: Ferrite.

Printed Circuit Mounting

Protected By Polyolefin Tubing

High Saturation Bobbin Used Allowing High Inductance with Low DC Resistance

Pre-Tinned Leads

High Resistivity Core Offers Very High Parallel Resistance, Resulting in Maximum Coil Performance

20 Sleeveless Models Available at Reduced Cost

Brand/Series	IHD Series
Current Rating	1.6 A
Diameter, Lead	0.032 "
Inductance	390 μH
Length, Lead	1.13 "
Resistance, DC	0.288 Ohms
Temperature, Operating, Maximum	+125 °C
Temperature, Operating, Minimum	-55 °C
Termination	Through-hole
Tolerance	±15 %
Type	High Current
关键词

Brand/Series IHD Series  Vishay Dale Brand/Series IHD Series  Inductors Brand/Series IHD Series  Vishay Dale Inductors Brand/Series IHD Series   Current Rating 1.6 A  Vishay Dale Current Rating 1.6 A  Inductors Current Rating 1.6 A  Vishay Dale Inductors Current Rating 1.6 A   Diameter, Lead 0.032 "  Vishay Dale Diameter, Lead 0.032 "  Inductors Diameter, Lead 0.032 "  Vishay Dale Inductors Diameter, Lead 0.032 "   Inductance 390 μH  Vishay Dale Inductance 390 μH  Inductors Inductance 390 μH  Vishay Dale Inductors Inductance 390 μH   Length, Lead 1.13 "  Vishay Dale Length, Lead 1.13 "  Inductors Length, Lead 1.13 "  Vishay Dale Inductors Length, Lead 1.13 "   Resistance, DC 0.288 Ohms  Vishay Dale Resistance, DC 0.288 Ohms  Inductors Resistance, DC 0.288 Ohms  Vishay Dale Inductors Resistance, DC 0.288 Ohms   Temperature, Operating, Maximum +125 °C  Vishay Dale Temperature, Operating, Maximum +125 °C  Inductors Temperature, Operating, Maximum +125 °C  Vishay Dale Inductors Temperature, Operating, Maximum +125 °C   Temperature, Operating, Minimum -55 °C  Vishay Dale Temperature, Operating, Minimum -55 °C  Inductors Temperature, Operating, Minimum -55 °C  Vishay Dale Inductors Temperature, Operating, Minimum -55 °C   Termination Through-hole  Vishay Dale Termination Through-hole  Inductors Termination Through-hole  Vishay Dale Inductors Termination Through-hole   Tolerance ±15 %  Vishay Dale Tolerance ±15 %  Inductors Tolerance ±15 %  Vishay Dale Inductors Tolerance ±15 %   Type High Current  Vishay Dale Type High Current  Inductors Type High Current  Vishay Dale Inductors Type High Current