关于我们 | 联系我们

库存查询

600 Series Encoder, 30 Ma Current Rating, 5 VDC (Nom.) Voltage Rating

The series 600 controls are manually operated, rotary, optical encoders that output two square waves in quadrature at a rate of 128 pulses per channel per revolution as a standard with other resolutions down to 60 pulses available. The outputs are TTL compatible. The variation in this series is in the terminal configuration: either pin leads or cable leads.

Specifications. Input Power: 5 volts DC ±5% @ 30 MA max. plus external requirements. Output Rate 128 pulses/revolution per channel-standard; Other pulses/revolution between 60 and 128 are available. Channels: Two separate output channels in quadrature, 90° ±45°. Output Voltage: High level voltage — 2.4 volts min. with 10 KΩ load to ground; Low level voltage — 0.4 volt max. Operating Temp: -20°C to +65°. Vibration: 10 to 2000 Hz, 15 G peck; MIL-STD-202 method 204 test C. Shock: 100 G @ 6 ms MIL-STD-202 method 213 condition 1.

Mechanical Characteristics. Shaft Rotation: Continuous in either direction. Operating Speed: 300 rpm max. Rotational Life: 10 million revolutions. Rotational Torque: 1.5 ozs. in max. Shaft: 1/4 diameter standard, stainless steel. Bushing: 3/8 diameter standard, brass, nickel plated. Terminals: P/C Type — 0.25 by 0.12 thick brass, gold plated to facilitate soldering. Cable Type — Four lead ribbon cables, color-coded, with 0.050 spacing, 28 AWG stranded copper wire, 0.39 diameter. Strength: Terminals withstand 2 Lbs. push and pull and a 90° bend. Mounting Hardware (not supplied): For 3/8 bushing, use hex mounting nut 3/8 × 32 thread, 1/2 across flats, 3/32 thick; internal tooth lockwasher 11/16 O.D. by 0.022 thick. Seals: Mounting seal and shaft seal available. Controls are not sealed for board washing. Weight: P/C type or cable type. 1 in. FMS shaft and 3/8 bushing-0.046 Lb. (21 G). Loc. Pin (Not Standard): Single pin located 17/32 from center can be supplied.

Optical Incremental Encoders

Analog to Digital Converters

TTL Compatible All Models

Only 1.125" Diameter × 0.484" Deep

Actuation Force	6.8 Kg (Push?Pull) (Shaft Axial)
Angle of Throw	90 ° (Counter Clock Wise)
Brand/Series	600 Series
Contact Resistance	10 Kiloohms (Pull-up)
Current Rating	30 mA
Material	Molded Thermoplastic (Housing)
Mounting Torque	0.011 Nm (Max.) (Operating)
Output Type	Optical
Standards	MIL-STD-202
Temperature, Operating	-40 to 65 °C
Type	Incremental-Optical
Voltage Rating	5 VDC
关键词

• 参考图片
• 制造商 / 说明 / 型号 / 仓库库存编号
• PDF
• 操作

• 
  
• Honeywell
  Encoder, 30 mA, 5 VDC (Nom.), 10 Kilohms (Pull-up), -40 to 65 degC, Optical
  
  型号：600128CN1
  仓库库存编号：70152976
  
• 
  
• 搜索

• 
  
• Honeywell
  Encoder, 30 mA, 5 VDC (Nom.), 10 Kilohms (Pull-up), -40 to 65 degC, Optical
  
  型号：600128CBL
  仓库库存编号：70152977
  
• 
  
  
• 搜索

• 
  
• Honeywell
  Encoder, 30 mA, 5 VDC (Nom.), 10 Kilohms (Pull-up), -40 to 65 degC, Optical
  
  型号：600128C24
  仓库库存编号：70152979
  
• 
  
  
• 搜索

Actuation Force 6.8 Kg (Push?Pull) (Shaft Axial)  Honeywell Actuation Force 6.8 Kg (Push?Pull) (Shaft Axial)  Encoders Actuation Force 6.8 Kg (Push?Pull) (Shaft Axial)  Honeywell Encoders Actuation Force 6.8 Kg (Push?Pull) (Shaft Axial)   Angle of Throw 90 ° (Counter Clock Wise)  Honeywell Angle of Throw 90 ° (Counter Clock Wise)  Encoders Angle of Throw 90 ° (Counter Clock Wise)  Honeywell Encoders Angle of Throw 90 ° (Counter Clock Wise)   Brand/Series 600 Series  Honeywell Brand/Series 600 Series  Encoders Brand/Series 600 Series  Honeywell Encoders Brand/Series 600 Series   Contact Resistance 10 Kiloohms (Pull-up)  Honeywell Contact Resistance 10 Kiloohms (Pull-up)  Encoders Contact Resistance 10 Kiloohms (Pull-up)  Honeywell Encoders Contact Resistance 10 Kiloohms (Pull-up)   Current Rating 30 mA  Honeywell Current Rating 30 mA  Encoders Current Rating 30 mA  Honeywell Encoders Current Rating 30 mA   Material Molded Thermoplastic (Housing)  Honeywell Material Molded Thermoplastic (Housing)  Encoders Material Molded Thermoplastic (Housing)  Honeywell Encoders Material Molded Thermoplastic (Housing)   Mounting Torque 0.011 Nm (Max.) (Operating)  Honeywell Mounting Torque 0.011 Nm (Max.) (Operating)  Encoders Mounting Torque 0.011 Nm (Max.) (Operating)  Honeywell Encoders Mounting Torque 0.011 Nm (Max.) (Operating)   Output Type Optical  Honeywell Output Type Optical  Encoders Output Type Optical  Honeywell Encoders Output Type Optical   Standards MIL-STD-202  Honeywell Standards MIL-STD-202  Encoders Standards MIL-STD-202  Honeywell Encoders Standards MIL-STD-202   Temperature, Operating -40 to 65 °C  Honeywell Temperature, Operating -40 to 65 °C  Encoders Temperature, Operating -40 to 65 °C  Honeywell Encoders Temperature, Operating -40 to 65 °C   Type Incremental-Optical  Honeywell Type Incremental-Optical  Encoders Type Incremental-Optical  Honeywell Encoders Type Incremental-Optical   Voltage Rating 5 VDC  Honeywell Voltage Rating 5 VDC  Encoders Voltage Rating 5 VDC  Honeywell Encoders Voltage Rating 5 VDC